Avocent SPC 800, Инструкция по установке и эксплуатации

Страница: 33 / 52

Chapter 3: Operations
27
To display information about one port:
At the SPC: prompt, type list port , optionally followed by a port name. Press Enter .
If you omit a port name, you are prompted for it (Port Name:).
To display information about all ports:
At the SPC: prompt, type list ports and press Enter .
Examples
The following command requests information about port B1 by specifying its
absolute port name:
SPC: list port .b1<Enter>
.B1 hr_1 hr_srv
Usernames:
ADMN GEN1 GEN2
JOHNDOE
Username List for .B1 Complete
The display indicates that port B1 has the descriptive name hr_1 and is in the
port group named hr_srv. The usernames who may access this port are Admn,
Gen1, Gen2 and JohnDoe.
The following command requests information about all ports:
SPC: list ports<Enter>
.A1 ops_1 ops_serv
Usernames:
ADMN GEN1 GEN2
JANEDOE
Username List for .A1 Complete
Press: N)ext, Q)uit:
The first screen of the resulting display indicates that port A1 has a descriptive
port name of ops_1 and is in the port group named ops_srv. The usernames
who may access port A1 are Admn, Gen1, Gen2 and JaneDoe. The page ends
with a prompt to continue with the display for the next port, A2, or quit and
return to the SPC: prompt.
Displaying user information
The List User and List Users commands display information about one
or all users, respectively. When requesting information about one user,
the display includes a list of all ports the user may access, and whether
the Show command is enabled or disabled for the user. When requesting