Avocent SPC 800, Инструкция по установке и эксплуатации

Страница: 29 / 52

Chapter 3: Operations
23
Additionally, you may end a session from the control screen by pressing q . A
session ends automatically when no activity is detected for five minutes, or
upon loss of connection to the Avocent CPS.
NOTE: If you have made configuration changes during a session, you must end the session by
using the Quit command or by pressing q from the control screen to ensure that configuration
changes are stored in memory.
To end a session:
At the SPC: prompt, type quit and press Enter .
Administration Commands
Administration commands include the Add, Del, List and Set commands, plus
the Admnp command. Some of these commands manage usernames and
their privileges. Other administration commands affect the control screen.
Administration commands may only be issued by a user with administrative
privileges, such as the predefined Admn user or another user who has been
granted administrative privileges with the Admnp command.
To display a list of available Add commands:
At the SPC: prompt, type add and press Enter .
The following display appears:
ADD commands are:
USER PORT
To display a list of available Del commands:
At the SPC: prompt, type del and press Enter .
The following display appears:
DEL commands are:
USER PORT
To display a list of available List commands:
At the SPC: prompt, type list and press Enter .
The following display appears:
LIST commands are:
USER USERS PORT PORTS