Avocent HMX Manager, Инструкция по установке и эксплуатации, Страница: 25 / 56

Chapter 3: Managing Units
17
3. Click the unit name about which you require information.
4. The Unit Overview window will open. In the Unit Settings in the side navigation bar click
Versions. The Unit Version Information window will open, containing the following
information:
• Release - The overall unit build release number.
• Application - The version of the application software deployed on the unit.
• Boot - The version of the boot software deployed on the unit.
• FPGA - The version of the FPGA deployed on the unit.
Rebooting a unit
To reboot a unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
5. In the Tools section, click Reboot.
Enabling Auto-Login Mode for a user station
You can configure a user station to allow any user to access the target device paired with that user
station, without the need to enter a user name or a password; this is called Auto-Login Mode.
To enable or disable Auto-Login Mode for a user station:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.
3. Click the user station name about which you require information.
4. The Unit Overview window will open
5. Under Unit Settings in the side navigation bar, click Modes.
6. In the Unit Auto-Login Mode section, choose Disable or Enable.
7. If Auto-Login mode is enabled, select a target device from the Auto-Login Mode Target
Device list-box. This is the target device that will be connected during the auto-login process.
8. Click Save and then click Close.
9. The unit reboots to apply the changes.
Setting the Operating Mode for an user station
The HMX system can operate in two modes - Desktop Mode and Extender Mode. The operating
mode of an HMX system can be set through the user station.