Avocent HMX Manager, Инструкция по установке и эксплуатации, Страница: 23 / 56

Chapter 3: Managing Units
15
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
To change the name of a unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
5. Type a name for the managed unit. You cannot change the type.
6. Click Save and then click Close. The Unit All window will open.
Changing Unit Properties
The HMX Manager enables you to manage the following properties for each unit:
• Department
• Location
• Primary contact details (name, telephone number)
To change the properties of a unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
5. Select Properties from the side navigation bar.
6. The Unit Properties window will open. This window displays all the general properties of the
unit. Edit the properties you wish to change.
NOTE: Part Number (MPN), Serial Number (EID) and Model are read-only values. These values are read from a
unit during discovery and cannot be changed.
7. Click Save and then click Close.
8. The updated properties are displayed.
Configuring Network Settings for an IQ or User Station
The administrator can use the HMX Manager to change a unit's IP address, Subnet Mask, Default
Gateway and DHCP status. Once you have implemented the changes the unit will reboot.
To change the network settings of a managed unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.