Avocent HMX Manager, Инструкция по установке и эксплуатации, Страница: 20 / 56

12
HMX Manager Installer/User Guide
To add a single unit that already has an IP address:
1. In a Units View window containing managed units, click Add. The Add Unit Wizard
Welcome Window will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Add a single unit, then click Next.
3. The Select Unit Type window will open. Select a unit from the product list, then click Next.
4. The Select Address Configuration of Unit window will open. Click Yes, the (Managed Unit
Type) does have an address and type the address of the unit. Click Next.
5. The Search Results window will open. The name and MAC address of the discovered unit
will be displayed. Click Next.
6. The Completed Successfully window will open. To exit the Add Unit Wizard, click Finish.
Adding units from a range of IP addresses
This procedure is valid for IQs and user stations.
To add a unit from a range of IP addresses:
1. In a Units View window containing managed units, click Add. The Add Unit Wizard
Welcome Window will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Discover units within an IP address
range, then click Next.
3. The Enter IP Address Range window will open.
a. Type the IP address in standard dot notation (xxx.xxx.xxx.xxx), from which to begin the
search.
b. Type the IP address in standard dot notation (xxx.xxx.xxx.xxx), at which to end the
search.
c. Click Next.
4. The HMX Manager will search for managed units within the IP address range. When the
search is completed, the Select Units to Add window will open, listing the results.
5. Add units
• To add one or more managed units, select the managed units in the Units Found list, then
click Add. The managed units will be moved to the Units to Add list.
• To remove one or more managed units, select the managed units in the Units to Add list,
then click Remove. The managed units will be moved to the Units Found list.
6. Click Next.
7. The Completed Successfully window will open. To exit the Add Unit Wizard, click Finish.
Adding Units on an IP Subnet
This procedure is valid for IQs and user stations.