Avocent HMX Manager, Инструкция по установке и эксплуатации, Страница: 24 / 56

16
HMX Manager Installer/User Guide
3. Click the unit name whose network settings you wish to change.
4. The Unit Overview window will open.
5. Click Network. The Unit Network Settings window will open. To change information:
• Type an address, in standard dot notation (xxx.xxx.xxx.xxx).
• Type a subnet, in standard dot notation (xxx.xxx.xxx.xxx).
• Type a gateway, in standard dot notation (xxx.xxx.xxx.xxx).
• Enable or disable DHCP.
6. Click Save and then click Close.
Authentication Server Settings
Authentication server settings are applied only to user stations. The Authentication Servers’ menu
item in the side navigation bar will only be displayed if the unit type is an user station.
To view Unit Authentication Server settings:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.
3. Click the user station name about which you require information.
4. The Unit Overview window will open.
5. Click Authentication Servers under Unit Settings in the side navigation bar.
6. The Unit Authentication Server Settings window will open. This window displays the
address of the authentication server used by the unit.
To change Unit Authentication Server settings:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.
3. Click the unit name about which you require information.
4. The Unit Overview window will open.
5. Click Authentication Servers under Unit Settings in the side navigation bar.
6. The Unit Authentication Server Settings window will open. This window displays the
address of the authentication server used by the unit. To change information:
• Type an address, in standard dot notation (xxx.xxx.xxx.xxx).
7. Click Save.
Viewing Version Information
To view version information for a unit:
1. Click the Units tab.
2. A list is displayed of all the units that are managed by the HMX Manager.