Avocent HMX Manager, Инструкция по установке и эксплуатации, Страница: 21 / 56

Chapter 3: Managing Units
13
To add a unit from a Subnet:
1. In a Units View window containing managed unit, click Add. The Add Unit Wizard
Welcome Window will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Discover units on an IP subnet
address, then click Next.
3. The Enter Subnet Address Window will open.
4. Type the IP address in standard dot notation (xxx.xxx.xxx.xxx) and click Next.
5. The HMX Manager searches for managed units within the IP subnet address range. When the
search is completed, the Select Units to Add window will open, listing the results.
6. Add or remove units
• To add one or more managed units, select the managed units in the Units Found list, then
click Add. The managed units will be moved to the Units to Add list.
• To remove one or more managed units, select the managed units in the Units to Add list,
then click Remove. The managed units will be moved to the Units Found list.
7. Click Next.
8. The Completed Successfully window will open. To exit the Add Unit Wizard, click Finish.
To add a single unit that does not yet have an IP address (for example, if the IP
address is lost):
1. In a Units View window containing managed units, click Add. The Add Unit Wizard
Welcome Window will open. Click Next.
2. The Select Add Unit Procedure window will open. Click Add a single unit, then click Next.
3. The Select Unit Type window will open. Select a unit from the product list, then click Next.
4. The Select Address Configuration of Unit window will open. Click No, the (Managed Unit
Type) does not have an address. Click Next.
5. The Configure Unit Network Settings window will open.
a. Type the IP address and subnet mask, in standard dot notation (xxx.xxx.xxx.xxx), for the
managed unit.
b. Optionally, type a gateway in standard dot notation (xxx.xxx.xxx.xxx).
c. Click Next.
6. The Add Discovered Unit window will open. Select the discovered unit from the list, then
click Next.
7. The Completed Successfully window will open. To exit the Add Unit Wizard, click Finish.
Deleting Units
When you delete a unit, it is removed from the HMX Manager database, and all associated
connections will also be deleted.