Avocent AutoView 200, Инструкция по установке и эксплуатации, Страница: 31 / 60

Chapter 3: Basic Operations
25
2. Press the keyboard Control key twice within one second again. The
Administrator Commands menu appears.
3. Highlight Add Channel and press Enter . The Add Channel menu appears.
Figure 3.4: Add Channel Menu
4. Type in a new channel name, up to 14 characters long, and press Enter .
5. Type in the address for the computer you are naming and press Enter . The
address cannot be longer than two characters.
6. Type the dwell time for the ID window and press Enter .
7. Type the dwell time for scanning and press Enter .
8. Highlight ID Setup and press Enter . Use the Arrow keys to position the ID
window where you would like it to appear when this channel is selected. Press
Enter . For more information, see Confi guring the ID window in this chapter.
9. Highlight Save Changes and press Enter .
-or-
Press
Escape to exit the window without saving changes.
To edit an existing channel:
1. Highlight the channel you wish to change in the Administrator Channel List.
2. Press the Control key twice to access the Commands menu.
-or-
Press the
F2 key once. (If you press F2 , skip to step 4.)
3. Highlight Edit Channel and press Enter . The Edit Channel menu appears.
Scan Dwell Time 5
Avocent Control Panel
Add Channel
Name Marketing
Address C
ID Dwell Time 5
ID Setup
Save Changes
ENTER = next ESC = exit