Avocent AutoView 1000R, Инструкция по установке и эксплуатации, Страница: 41 / 56

34
AutoView 1000R/AutoView 2000R Installer/User Guide Chapter 3: Analog Port Operation
35
4. Click X to close the Command dialog box.
NOTE: Scanning will commence when the Main dialog box or flag is displayed. Scanning is
inhibited in any other OSCAR dialog box.
To cancel scan mode:
1. Select a server if OSCAR is open.
-or-
Move the mouse or press any key on the keyboard if OSCAR is not open.
Scanning will stop at the currently selected server.
-or-
Press
Print Screen. The Main dialog box will appear.
2. Click Commands . The Command dialog box appears.
3. Clear Scan Enable.
Broadcasting to Servers
The analog user can simultaneously control more than one server in a system,
to ensure that all selected servers receive identical input. You can choose to
broadcast keystrokes and/or mouse movements independently.
NOTE: You can broadcast to up to 16 servers at a time, one server per ARI port.
To access the Broadcast dialog box:
1. Press Print Screen . The Main dialog box will appear.
2. Click Setup - Broadcast . The Broadcast dialog box appears.
Figure 3.19: Broadcast Dialog Box
NOTE: Broadcasting Keystrokes -
The keyboard state must be identical for all servers receiving
a broadcast to interpret keystrokes identically. Specifically, the
Caps Lock
and
Num Lock
modes
must be the same on all keyboards. While the appliance attempts to send keystrokes to the
selected servers simultaneously, some servers may inhibit and thereby delay the transmission.