AVM OVATION MP 6.3, Руководство по эксплуатации

Страница: 29 / 30

29
4 Appendix
4.1 Cleaning
Surface and pressure of the housing are largely scratch-resistant. It can be cleaned with mild
soapy water or a glass cleaner and a soft duster.
ATTENTION : During cleaning, liquid must never be allowed to enter the interior of the housing.
For safety reasons, the power cord should also be disconnected before damp wiping. Do not
use any solvents or abrasive cleaners that could damage the surface or printing on the housing.
4.2 Troubleshooting
Some putative defects are often caused by mistakes in operation. Sometimes other units
connected to the amplifier can cause problems. We therefore kindly ask you to read the
following tips before consulting your dealer or us.
1. No playback
a)
Inadvertent switching to standby. Press power button (1).
b) If the control LED (7) and display (9) do not light up a fuse can be blown due to overvoltage
(e.g. in case of a thunderstorm etc.). Please contact your dealer.
2. RC 9 remote control doesn’t work
a) Charge the included lithium-ion battery of the optionally available RC 9 remote control.
b) Point with the remote control transmitter directly to the unit.
c) Reconnect the RC 9 remote control with your device. This process is also referred to as
Pairing . In order to start the pairing process, please follow the instructions as described in
section 1.8.1.
3. The display shows „no disc“, although a CD is inserted
a)
Please make sure the CD is not a data disc, has not been damaged and is inserted with the
correct side facing up
b) Please clean your CD with a soft cleaning cloth.