AVM OVATION MP 6.3, Руководство по эксплуатации

Страница: 24 / 30

24
2.5 Source selection
In addition to the integrated CD drive, the device is equipped with a large number of digital
inputs that can be activated using the two option keys (2, 3). The current source is shown on
the left side of the display (9) under
SOURCE .
Selecting additional sources such as
Spotify Connect®, Apple AirPlay, TIDAL, QOBUZ,
HIGHRESAUDIO, Webradio, Podcasts, Music Server or USB (STICK HDD) (29) is only
possible using the optionally available RC 9 remote control or the free RC X App for iOS and
Android .
NOTE:
If you switch to another source during CD playback, the CD will stop before changing
the input. This process may take a few seconds. If a digital input is selected and no compatible
digital signal is present, the display (9) shows
NO SIGNAL
or
NO USB
instead of the volume
indicator. In this state volume settings (see section 2.6) cannot be adjusted due to the selected
digital input.
2.6 Volume setting
If the
VARIABLE option is activated via the Personal Setup menu (see section 3.1.1), the
playback volume of the selected source can be adjusted via the front panel. The display will
then show the currently selected volume value of 0 - 100 dB in large letters in the right area
and can be adjusted in steps of 0.5 dB or 2 dB by pressing and holding the option
keys < >
(2,
3).
ATTENTION : Please note that even if the VARIABLE option is activated, a short press of the
two option buttons < > (2, 3) causes a change of the input source. To change the playback
volume, however, a longer press of the two selection buttons of approx. 1 second is required.
NOTE:
With the optionally available RC 9 remote control, the volume is always changed in
steps of 2 dB.
2.7 Samplerate and filter setting
By pressing the
FILTER
button (5) once or several times, you can choose between available
sample rates and filter setttings for a specified source (CD or digital input). The currently
selected sample rate is displayed at the bottom left corner (44.1, 48, 88.2, 96, 176.4, 192, 352,
384 kHz). The
NAT indicator stands for "Native" and means that the applied sample rate of the
signal is directly processed and converted. CNV , on the other hand, stands for "Conversion"
and means that up- or downsampling to the selected sample rate is performed.
PLEASE NOTE
that only the settings
NAT / STEEP
or
NAT / SMOOTH
are available if
USB
is
selected.
You may select the
STEEP and SMOOTH filter settings according to your sonic preferences.
Depending on the signal being reproduced, different filter settings can produce optimal results.