AVM OVATION MP 6.3, Руководство по эксплуатации

Страница: 20 / 30

20
2 Basic operation
2.1 First operation / self test
When switching on for the first time, a so-called self-test is performed if the device has been
completely disconnected from the power supply or switched off via the mains switch (35). The
device checks the configuration and functionality of the installed components. This process is
indicated by a flashing Standby LED (7) and may take a few seconds.
2.2 Switching on / stand-by
With the power button (1) you can toggle between operation and standby mode. In standby
mode the display is dark and the standby LED (7) is on. As soon as the machine is in operating
mode, the standby LED (7) goes out and the display (9) is activated.
Tube warmup (MP 8.3)
Due to the warm-up phase of the integrated tube line stage, the power-on time of the MP 8.3
is extended by approx. 30 seconds.
CAUTION: When switched to stand by the unit is still connected to the mains. In case of a
thunderstorm or if you leave the house for a longer time, we recommend you switch the
amplifier off by using the mains switch (35) or pull the mains plug (34).
2.3 Display
When the unit is on, the display (9) shows information about the current settings and state of
your Media Player. Apart from informations about the operating status (CD Player, Digital Input
etc.) the lower line shows you currently active settings of the D/A converter: On the left-hand
side the sample rate (e.g.
PCM 192kHz ),) is displayed. On the right-hand side, you will find the
current filter setting ( SMOOTH or STEEP).
2.3.1 Display in CD player mode
TRACK
On the left-hand side both the current title is displayed (big figures) and the total number of
available tracks of the inserted CD (small figures).
TIME
At the centre of the display the total duration of an inserted CD is displayed, while stopped
(
STOP ). As soon as the CD is played ( PLAY ) or paused ( PAUSE ), the time already elapsed of
the current track is displayed.