AVM OVATION MP 6.3, Руководство по эксплуатации

Страница: 18 / 30

18
ü
First, perform the Pairing procedure as described in section 1.8.1 and select the newly set
up AVM device on the RC 9 using the Device Selection menu item. You can reach this
menu item via the System Settings menu that you call up by pressing the Settings button
(tool symbol) of the
RC 9
.
ü
On the RC 9 , select the menu item Settings (Einstellungen) in the main menu by pressing
the upper or lower navigation button several times.
ü
By pressing the
Enter
button, select the menu item
Network assistant
and
WLAN
connection.
ü By selecting the
Scan
menu item afterwards, your AVM device searches for available WLAN
networks and lists them in an overview.
ü
Select the desired WLAN network and enter the network key (WLAN password) via the input
keys of the
RC 9
after pressing
Key
.
ü Confirm the entered network key (WLAN password) by pressing the
Enter
button and select
Connect . In the following overview Network Info , the Wireless section displays details of
the WLAN configuration.
1.11 Software & Firmware Updates
For maximum ease of use and to get the most out of your device, it is necessary to keep both
the firmware of the integrated AVM X-STREAM Engine® and the
RC X App up to date. The
latest version of the
RC X App
can be downloaded from the Apple App Store or the Google
Play Store . To check on the installed AVM X-STREAM Engine® firmware version, use the
RC
X App or the optionally available RC 9 remote control. Also, make sure your device has an
active internet connection before you perform either of the following two steps (see section
1.10).
1.11.1 AVM X-STREAM Engine® Update via the RC X App
ü
Call up the menu item
Firmware Update
in the
Settings
and select C
heck for Online
Update
.
ü
If a new version is available under
SW Update
or
Host Update
, install it by clicking
Install
Update .
ü
The device restarts to install the update. Do not switch off the device and wait until the
update process is completely installed. The update process will be shown on the display of
the device if necessary.
ü
Once the update process is complete, the device will reboot and be ready for use again.