27
in the right half the new name. The edited character is marked with an underscore. With the
REPEAT
button (6) you determine the position of the character to be changed, with the
SKIP
buttons (13, 14) you set the desired character. Short tapping switches to the next / previous
letter.
3.1.5
Set fixed volume
VARIABLE
If the
VARIABLE
option is activated, the playback volume of a source can be adjusted using a
remote control, the
RC X App
or the front panel control. See section 2.6 Volume Control.
ATTENTION:
Please note that even if the
VARIABLE
option is activated, briefly pressing one
the two option buttons
< >
(2, 3) will cause a change of the input source. To change the
playback volume, however, a longer pressing of the two option buttons of approx. one second
is required.
FIXED VOL
If the
FIXED VOL
option is activated, the signal is reproduced with a fixed gain setting. It is not
possible to change the volume via remote control or the selection buttons on the front panel.
In the general operating mode, the
FIX
indicator on the right side of the display (9) indicates
this setting.
3.1.6
Set autoplay
If the
AUTOPLAY
function is activated, the unit will automatically start playback after inserting
a CD without the need to press the
PLAY
button first. In addition, the unit automatically
switches from an active digital input to CD mode. In the factory setting, this function is activated
(on). If the
AUTOPLAY
function is deactivated, however, an inserted CD is only read in the
background - without changing to CD mode.
3.1.7
Set IR control
In addition to control your device via the optionally available
RC 9
remote control or the free
RC X App for iOS and Android
, a range of essential functions can also be controlled via the
classic RC 3 or RC 8 infrared remote controls. In order to receive a respective infrared signal
of the RC 3 or RC 8, please make sure to activate the
set ir control
function (
ON
).
3.1.8
set auto standby
To save energy, the unit is equipped with a circuit that automatically puts the unit into standby
mode if there is no music signal on the currently active input for more than 20 minutes. This
function is activated (
ACTIVE
) by default and can be deactivated permanently with this menu
item (
NOT
ACTIVE
).
The selected setting is permanently stored when leaving the
Personal Setup
, but can be
changed at any time by calling up the
Personal Setup
again.
Содержание OVATION MP 6.3
Страница 1: ...Operating instructions OVATION MP 6 3 OVATION MP 8 3 ...
Страница 2: ......
