AVM INSPIRATION CS 2.2, Руководство по эксплуатации

Страница: 24 / 27

24
4 Appendix
4.1 Cleaning
Use a soft cloth and normal glass cleansing fluid.
CAUTION
Make sure that no fluid comes into the unit. Do not use scouring cleaners. They may damage
the surface.
4.2 Troubleshooting
Some putative defects are often caused by mistakes in operation. Sometimes other units
connected to the amplifier can cause problems. We therefore kindly ask you to read the
following tips before consulting your dealer or us.
1. No playback
a)
Mute function is active, press button MUTE on your remote control or increase the
volume using the rotary encoder (14).
b) Inadvertent switching to stand by. Press power button (1). If the LED indicator and display
do not light up a fuse can be blown due to overvoltage (e.g. in case of a thunderstorm
etc.). Please contact your dealer.
2. Amplifier switches off during normal operation
This can happen if the temperature inside the unit becomes too high. In this case, the
amplifier switches off and the display shows ’overheat’. Switch the unit off and let it cool
down for five minutes.
3. Hum
a) Hum while playing records: Make sure that the chassis of your record player is properly
grounded.
4. RC 9 remote control doesn’t work
a) Charge the included lithium-ion battery of the optionally available RC 9 remote control
(see section
Error! Reference source not found.
).
b) Point with the remote control transmitter directly to the unit.
c)
Reconnect the RC 9 remote control with your CS 2.2. This process is also referred to as
Pairing
. In order to start the pairing process, please follow the instructions as described
in section 1.11.1.