21
3.2
FM-Tuner
3.2.1
Set RDS display
Choose if the name of the radio station (
NAME
), or the frequency (
FREQUENCY
) is shown on
the display.
3.2.2
Set scan mode
Set tuning mode between
AUTO
or
MANUAL.
After pressing one of the buttons 7 and 8,
AUTO
searches for the nearest available radio station.
MANUAL
enables you to manually
search for a radio station (see 2.5.1).
3.2.3
Set 2 channel mode
Set tuner to
MONO
or
STEREO
to obtain best sound.
NOTE
: Depending on the actual setting the threshold for auto tuning will change (sensitive in
MONO
, less sensitive in
STEREO
).
3.2.4
Set deemphasis
By chossing an adequate deemphasis value enhances the overall sound quality of the FM
tuner through an optimized signal-to-noise ratio. Unless you are using the CS 2.2 in the USA,
please make sure the option "EUR, AUS, JPN" is set.
3.3
Personal Setup
The personal setup offers you a range of settings to individualize the device according to your
personal needs. To enter the
personal setup
menu, please switch off your device on the rear
of the unit at the mains switch (33). Keep the most right key under the display pressed (8)
while you switch on the unit again (33). As soon as the display shows the
personal setup
menu
you can
release the multifunctional button (8). When the personal setup is active you
can
select
the
desired
function
using
the
buttons
< ITEM
>
.
The button
SELECT
activates the function. The setting is done using the buttons
< VALUE
>
.
BACK
leads you back to other settings.
EXIT
exits the personal setup and
stores the settings.
3.3.1
set display brightness
Sets display brightness 25% to 100%.
Содержание INSPIRATION CS 2.2
Страница 1: ...Operating instructions INSPIRATION CS 2 2...
Страница 2: ......
