AVM INSPIRATION CS 2.2, Руководство по эксплуатации

Страница: 16 / 27

16
2.4.1 Setting of input sensitivity
The level of signal sources differs often by several dBs. You recognize a step in volume, when
switching between two different inputs. With the sensitivity setting menu you can avoid this.
The sensitivity of each input can be adjusted between – 9.5 dB and + 10.0 dB.
Select any input (except Tuner or CD) and chose a convenient volume level. Now press the
multifunctional button 6 under the display for more than 2 seconds. The button is now
marked
EXIT LVL . Now you can switch between the sources (also Tuner and CD) and adjust
the levels by using the volume knob (14). Pressing this multifunctional button 6 under the
display again will exit the level setting mode and bring the unit back to normal operating
mode.
NOTE : While the level setting mode is active the unit will not respond to any RC 9 remote
control command.
2.5 FM Tuner
All basic functions of the FM Tuner can be accessed by the buttons right under the display
(4-8). More sophisticated functions (RDS display, mono/stereo, search mode etc.) are
available via the
Advanced Settings
menu (see section 3).
NOTE : All Webradio features can be accessed via the optionally available RC 9 remote
control or the free RC S App for iOS and Android.
2.5.1 Tuning
Depending on the selected mode (manual / auto, see section 3.2.2) the buttons under the
display (7, 8) are named
< AUT > oder < MAN >. In AUT mode, a tip on one of the buttons
lets the tuner automatically seek the next upper or lower station. In MAN mode, the frequency
changes in 50 kHz-steps as long as the button is pressed. In this case, the tuning indicator
shown in the display (3) helps you to tune correctly to the desired station. If tuning is correct it
will show
locked
.
2.5.2 Station and memory
Storing a new radio station
If you want to store a certain station in the memory, press the button MENU (6) under the
display (3) for more than 2 seconds. The display will propose the next free memory position
for storage (for example: if 5 stations are already stored, position 6 will be proposed). Using
the
MOVE buttons (4, 5) you can change the position. Now press STORE (8) to store at the
selected memory position. If a radio station is already stored at the selected position, the new
station will be saved to the respective position while moving any other station one step
further.