AVM INSPIRATION CS 2.2, Руководство по эксплуатации

Страница: 8 / 27

8
Turntable
Connect the output of your turntable with phono inputs (18) and connect the chassis ground
wire to the ground connector (16). The CS 2.2 phono input is suitable for MM cartridges as
well as for high and medium level MC cartridges. Sensitivity can be adjusted (see 2.4.1).
1.6 Connecting digital signal sources
Inputs SPDIF/ (RCA Cinch, optical)
Connect the outputs of your digital sources to the corresponding inputs of the CS 2.2 (29,
30).
Digital out
The input of a digital recorder must be connected to the digital outputs (31, 32). The signal on
the digital outputs depends the selected source (built-in CD, dig in).
1.7 Connecting a recorder
Connect the recorder’s output to one of the inputs (19). The inputs of the recorder must be
connected to the fixed level output (25).
1.8 Connecting a subwoofer
If you use an active subwoofer (with built in power amplifier), simply connect it's inputs to the
unit's pre out (26) and adjust the bass level at the subwoofer.
1.9 Connecting loudspeakers
Connect the speakers to the speaker terminals (28). Use only good speaker cables with
sufficient diameter. Make sure, that the red terminals are connected to the red or "+“
terminals of the speakers and the black terminals to the black or “-“ terminals of the
speakers.
1.10 Tuner antenna
Connect the antenna cable to the antenna socket (15).