AVM INSPIRATION CS 2.2, Руководство по эксплуатации

Страница: 17 / 27

17
Modifying, moving or deleting an existing station
If the tuner is set to an already stored station you can change its settings (mono/stereo,
bandwidth and more), move it to a different position or delete it. First off, adjust any
advanced setting for a stored radio station and press the
MENU button (6) under the display
(3) for more than 2 seconds. Using the buttons MOVE (4, 5) allows you to change the position
of the selected station before storing with STORE (8). DELETE (7) will remove the station
from the memory.
EXIT
will bring the unit back to normal operating mode without changing
the memory.
NOTE: The station memory allows you to store up to 63 stations. It stores not only their
frequency, but also a range of individual settings such as mono/stereo, bandwidth or other.
2.5.3 Selecting a station out of the memory
The
buttons < STAT > (4, 5) select the stations stored in the memory. A short tip switches to
the next / previous station. Holding the button down scans automatically up / down. The
number of the actual station is shown in the display (
PGM xx).
2.6 CD Player
The basic functions of the CD Player such as
Play , Pause , Stop and Eject can be accessed
by the buttons right under the display (4 – 8). For more sophisticated functions such as
repeat, random etc. please refer to section 2.6.4, 2.6.5, and 2.6.6.
2.6.1 Insert / eject
Insert a CD
The CS 2.2 has a slot-in CD drive. Insert the CD (cover side up) and push slightly. The drive
will now automatically draw the disc inside. After that the player reads the TOC and shows it
on the display. Furthest left is the number of the actual track followed by the total number of
tracks on the CD (for example "1/17"). The middle of the display shows the total playing time
of the CD.
NOTE: If there is still a CD inside or the unit is in stand by, the slot will be blocked. If the
inserted disc is not readable (DVD, Data CD) the display will show no playable disc
Eject CD
Press the button (7) under the display (3). An inserted CD will then be ejected.
Auto CD function
If CD is not selected as source the unit will automatically change to CD from any other input
after you have inserted a CD.