AVM INSPIRATION CS 2.2, Руководство по эксплуатации

Страница: 11 / 27

11
1.13.2 Setting up a wireless WiFi connection
To set up your AVM device with a wireless WiFi connection, you need to download and install
the free
RC S App for iOS and Android or use the optionally available RC 9 remote control.
The following instructions refer to the installation process by use of the RC S App. For details
on how to connect your AVM device with the RC 9 remote control, please refer to section
1.11.1. A detailed description of the entire functionality of the RC 9 remote control and the
RC
S App for iOS and Android can be found in a separate manual on the respective product
pages of our AVM website: www.avm.audio .
NOTE:
Before using the wireless WiFi functionality of your AVM device, an initial set-up of a
wired LAN connection is mandatory. This non-recurring step is required to set-up an initial
WiFi connection between your AVM device and the RC S App via your local home network.
ü
Please switch off your AVM device on the rear side of the unit (33).
ü
Plug a LAN cable from your local router into the LAN port of your AVM device (17).
ü Switch on the device on the rear side of the unit (33). Wait until the device has started and
went into stand by mode. Now, switch it on with the power button on the front side (1).
ü
After a brief starting process your AVM device automatically connects to your local home
network and is ready to be operated via the
RC S App for iOS and Android.
ü
Launch the RC S App on your smartphone or tablet. The RC S App will now automatically
search and list all available AVM devices in your local network with their respective device
name and IP adress (e.g. "192.168.xxx.x" etc.).
ü Choose an availbale device and wait until a connection is established.