984-0013-04
5
III
PROGRAMMING INSTRUCTIONS
The EMS5 is pre-programmed at the factory to function as an intercom system. It
will work using all the default codes described in this manual. There is no need
for additional programming.
If you are planning to connect a phone line to the unit then you must follow the
programming instructions below:
ACCESSING PROGRAMMING MODE
There are three methods you can use to program the EMS5 call director.
•
Method 1: Plug a touch-tone phone into the port on the EMS5 labeled “LOCAL
SERVICE” or use the Master Station phone. If you have multiple EMS5 units use
the “LOCAL SERVICE PORT” on the last unit of the group. Pick up the handset
and enter the pass code * * 08601. Listen for three beeps. Follow the
programming instructions below.
•
Method 2: Call into the EMS5 unit from another line. When the unit answers
enter the pass code **08601. Listen for three beeps. Follow the programming
instructions below.
•
Method 3: Press the “Program” above the onboard keypad. If you have multiple
EMS5 units press the “Program” button on the first (Master EMS5) unit of the
group. Follow the programming instructions below. (You don’t need to enter the
pass-code **08601)
PROGRAMMING THE EMS5(s) TO DIAL ON A STANDARD PHONE LINE
The EMS5 can dial up to three different phone numbers. Wait for three beeps after each
step. If you need to dial a “9” or another digit to get an outside phone line, you can add
a 2 second pause after the “9” by entering a “*” (ex. * 03 9 * 5551212 #)
PROGRAMMING ONLY ONE PHONE NUMBER - enter as follows:
a. * 01 # - this clears the No. 1 dialing position
b. * 02 # - this clears the No. 2 dialing position
c. * 03, followed by the phone number to be dialed, # to end (ex: * 035551212 #)
PROGRAMMING TWO PHONE NUMBERS - enter as follows:
a. * 01 # - this clears the No. 1 dialing position
b. * 02 followed by the first phone number to be dialed, # to end
c. * 03, followed by the second phone number to be dialed, # to end
PROGRAMMING THREE PHONE NUMBERS - enter as follows:
a. * 01 followed by the first phone number to be dialed, # to end
