manualshive.com logo in svg

Avidsen 114461, Руководство пользователя

Поделиться
Скачать
Avidsen 114461 Скачать руководство пользователя страница 37

EN

37

CONNECTED MOTOR DRIVE KIT

D - BEGINNING OPERATION

4.4.1 - IF YOU HAVE AN ANDROID SMARTPHONE
WITH GOOGLE ASSISTANT

The following information may vary depending on 
updates to the Google Home app or
your operating system.

Your devices need to be paired in the 

Avidsen Home

 

app to be controlled with Google Assistant. They 
must be on the same WiFi network as the assistant.

• Connect devices to Google Assistant

-   On your Android phone or tablet, press and hold 

the home button or say 

“OK Google”

.

-  In the lower right-hand corner, press 

.

-    Press the 

logo on the upper right

 then

 

Paramètres (Settings)

 

then

 

Assistant

 

and 

finally

 

Contrôle de la maison (Control from 

home)

.

-   In the “Appareils (Devices)” tab, press “Ajouter des 

appareils (Add devices)”  .

-   Select  the

 

Avidsen Home

 app, then follow the 

instructions.

-   Then enter the username and password of the 

Avidsen Home

 account to authorise Google 

Assistant to add and interact with your

 Avidsen 

Home 

accessories.

4.5 - USING WITH AMAZON ALEXA

Note:

 the name you give to your Avidsen Home

devices is the one Alexa will recognise. Example: if 
you have a contactor named “gate”, “Alexa, open 
gate” will work, whereas “Alexa, open motor drive” 
may not trigger anything.

The following information may vary depending on 
updates to the Alexa app or your operating system.
The Amazon Alexa Assistant can help you control 
your connected devices.
For example, you can use the following commands:
- “Alexa” Open gate.
- “Alexa” Close gate.
- “Alexa” Open garage
- “Alexa” Close garage.

Download and install the Amazon Alexa app from the 
Play Store or Apple store.
Your devices need to be paired in the Avidsen Home 
app to be controlled with Amazon Assistant. They 
must be connected on the same WiFi network.

• Installing the Avidsen Home Skill

-  In the Amazon Alexa app, press the menu at the 

top left and select Skills et Jeux (Skills and Games).

-   Search for Avidsen Home in the list of skills or use 

Recherche (Search) at the top right.

-   Select the Avidsen Home Skill and activate for use.
-   Enter the username and password for the Avidsen 

Home app.

-   Once the skill is correctly paired, press the cross at 

the upper left.

- The app will offer to search for devices. Press 

Detect devices.

• Connect devices to Amazon Echo

- Using the Découverte guidée (Guided Search) to 

connect a home automation device

·  In the Amazon Alexa app, press the menu at 

the top left and select Ajouter un appareil (Add a 
device).

·   Select the type of device you want to connect.
·   Select the brand and follow the instructions on the 

screen.

- Use voice command to connect an automated 

device

·  Once a skill is installed, say “Alexa, find new 

devices”.

·   After 45 seconds, Alexa will give you the devices 

found.

Содержание 114461

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды