Avidity Science Pico PICO10T2, Руководство по эксплуатации

Страница: 26 / 40

Pico Water Purification System Operation Manual Avidity Science, LLC
20
Maintenance
Replace Tank Vent Filter
The tank vent filter is located in a compartment on the left side of the back wall of the unit. The filter is
located behind the DI cartridge if installed.
Figure 12. Tank vent filter.
Follow this procedure.
1. Remove the left cover from the Pico unit.
2. On the control display, press .
3. Press .
4. Touch TC024 .
5. Touch TC024 . Wait for the pressure to be released which will take approximately 4 minutes.
6. When Remove TC023 appears, carefully lift the DI Cartridge out of the way, to expose the tank
vent filter.
NOTE: Appears for Type 2 water models only.
7. Touch
8. When instructed to remove the tank vent filter, pull the tank vent filter from the silicone tube.
9. Touch
10. Remove a new tank vent filter from its packaging.
11. Insert the barbed fitting of the tank vent filter into the silicone tube and place it in the slot.
12. Touch
13. When instructed to Refit TC023 , carefully mount the DI cartridge back into its mounting slots.
Be sure all tubing and fittings are secure.
NOTE: Appears for Type 2 water models only.
14. Touch . The DI cartridge will rinse for 10 minutes.
15. While the DI cartridge is rinsing, replace the left cover over the unit