Avidity Science Pico PICO10T2, Руководство по эксплуатации

Страница: 15 / 40

Avidity Science, LLC Pico Water Purification System Operation Manual
Installation and Setup
9
4. Connect the color tubing (blue, red, and black) to the fitting with the corresponding color label on
the cartridge. See Figure 5.
Figure 5. Pre-Treatment and RO module connections.
Connect Power Supply
Secure the power supply cord to connector on the Pico unit. Plug the power supply into the appli-
cable power outlet.
IMPORTANT: Be sure the feed water supply is turned on.
Touch
Perform Water Pressure Test
A water pressure test will assist in verifying that the feed water tubing is connected to the correct inlet fit-
ting. Follow this procedure.
1. Take one of these actions.
If a DI cartridge is... Then...
Required Go to step 2.
Not required Go to step 3.