OPERATION AND INSTALLATION MANUAL
EN-1320
FIGURE 5-9
5.7
Before Installing the Propeller Ending in -R(G) on the Engine
Measure the distance “X“ (see Figure 5-10) for the dimension, how far the beta tube must be
turned in (was recorded during previous propeller removal). This is important to set the low
pitch stop.
The O-ring „B“ in the engine flange and the O-ring „A“ on the beta-tube (see Figure 5-10) must
be replaced with every propeller installation.
FIGURE 5-10
61-10-20
INSTALLATION AND OPERATION INSTRUCTION
Page 5-6
2017-10-06
