AVG-CSK4K-44
5.1.4 Controlling a Far-end Device from the Matrix location
Connect an IR receiver to the IR IN on the Matrix Switcher. Use the IR Remote of the
far-end device to control the device locally.
Connect an IR receiver with IR carrier to the IR IN port of the Matrix Switcher, users
can control a far-end output display via its IR remote locally.
In this case, the IR signal is transferred via twisted pair. Only the corresponding IR
OUT port can emit control signals to the remote display.
See the figure below:
Controlling a Far-end Device from the Matrix location
Note: The IR receiver connected to
IR IN
must contain an IR carrier
5.1.5 Controlling a Local Device Remotely
Connect IR receiver(s) to IR IN on the far-end HDBT receiver(s), and IR Emitter(s) to
IR OUT port of the switcher, and use the IR Remote of local source to control the
device remotely.
1 to 1:
Connect an IR receiver to IR IN on far-end HDBT receiver, and an IR Emitter to IR
OUT port of the switcher. Use the IR Remote of local source to control the device
remotely. See below:
