AVG-CSK4K-44
5. System Operations
5.1 IR Control
5.1.1 IR Remote Description
Connect an IR receiver to the
IR CONTROL
port of the Matrix Switcher, users can
control the matrix through the included IR remotes. Here is a brief introduction to the
IR remote.
1)
Standby button, press it to enter/exit standby mode.
2)
Input channels, range from 1~4, corresponding IR
signal is switched synchronously when switching
input channels.
3)
OUTPUTS
In normal mode:
output channel selection
buttons.
In EDID invoke mode:
use buttons 1 & 2 to
select between the 5 embedded EDID data
’s
.
4)
Menu buttons: ALL, EDID, CLEAR and ENTER.
ALL
: Select all inputs/outputs.
EDID
management button: Enable input port
to manually capture and learn the EDID data
of the output devices.
CLEAR:
Withdraw an operation like switching
an output channel, learning EDID data before
it comes into effect. Meanwhile, the matrix will
return to the previous state.
ENTER:
Confirm operation. Press and hold it
for 3 seconds to enter in Query mode.
Note:
With this IR remote, the Matrix Switcher can be
controlled by the built-in IR, the extended IR receiver
connected to the
IR CONTROL
and the IR receiver on the
far-end receiver balun.
By using IR & HDBaseT transmission technology, the 4K Home Distribution Matrix
Kit has the following control options:
1)
Control a far-end output device locally.
2)
Control local input/output device remotely.
3)
Control the Matrix Switcher locally/remotely.
