Avery Weigh-Tronix ZK830, Инструкция пользователя

Страница: 33 / 55

34 ZK830 Counting Scale User Instructions
Menus
dLoAd This stands for download. Under SSEriAL you can view the serial
number of the software application that created the configuration file.
Under
dSEriA L you can view the serial number of the software
application that downloaded the configuration file. This is used for
security and licensing purposes.
bSq Use this to view the software part number, software version, serial number
of the currently connected load cell and the serial number of the load cell
the indicator was calibrated to. These last two items must match or you will
see a BSQ error displayed.
This completes the About menu. To exit the menu, see Exiting the menus on page 30 .
4.7 Audit menu
The Audit menu is shown in Figure 4.4 .
Figure 4.4 Audit menu
Use this menu to display audit counters for configuration and calibration. Each is
explained below. Use the
Numeric entry procedure (without optional keypad) on page
15 when you need to enter values.
countEr Use the Audit menu to view the two counters that tell you how many times
the indicator has been configured and calibrated.
This completes the Audit menu. To exit the menu, see Exiting the menus on page 30 .
Displays
number of
configurations
Displays
number of
calibrations
SELECT =
TARE =
PRINT =
UNITS =
ZERO =
SAMPLE/F1 = Escape or
Audit
Calib
Counter
Config