Avery Weigh-Tronix ZK830, Инструкция пользователя

Страница: 20 / 55

ZK830 Counting Scale User Instructions 21
3.2 Counting application
Deactivating a PLU (optional keypad only)
To stop using a PLU’s values, press 0 and then PLU . The display will show PLU Off .
This will clear all the values being used for that PLU and will return the scale to gross
weight mode.
3.2.10 Check counting
You can fill boxes within a specific upper and lower count limit. The bar graph will show
when you are under/over or at the accept number. Or if you have the optional light
stack, the lights can alert you to the count status.
Upper and lower limits can be stored in each of the (1-40) PLUs or a supervisor can set
fixed upper and lower limits that are always active until a PLU is recalled. If the PLU is
canceled the fixed limits become active again. See the illustration below.
Under Over Accept