Avery Weigh-Tronix ZK830 Скачать руководство пользователя страница 22

Страница: 22 / 55

ZK830 Counting Scale User Instructions

3.3 General weighing application

There is an auto tare clear feature. If this is enabled, after a weighment, when the
weight falls into the gross zero band, tare is cleared.

Using Pushbutton Tare

To perform a net weighment using pushbutton tare, power up the unit and follow these
steps:

With no weight on the scale, if the display does not read

press

ZERO

…

is displayed and the

center-of-zero

annunciator lights.

Place item to be tared on the scale …

Weight is displayed.

Press

TARE

…

is displayed and the

NET

annunciator lights.

Place material to be weighed onto the scale …

Net weight of material is displayed.

Repeatedly press

SELECT

to view the configured display values.

If repeated weighments use the same tared item, you do not need to establish
a new tare value as described in step

and

Using Entered Tare (with optional keypad only)

If enabled you can enter in a tare value using the optional keypad and this procedure.

Key in a tare weight using the keypad and press the

TARE

key to accept the

value …

The new tare value is now active. The displayed gross weight will now
be the negative of the tare value.

Place the container and the material to be weighed on the scale …

Net weight of material is displayed.

Using PLU tares (with optional keypad only)

PLU tares that are created and edited via the password protected Supervisor menu,
can be recalled using the following steps.

Press

ZERO

to zero the scale, if necessary.

Key in the PLU number (1-40) or the 3-7 digit part number and press

PLU

…

The tare value associated with that PLU is recalled and is now active.
The display will show a negative value (equal to the tare value).

Definition: Gross zero band - this is a configured value that defines a window around
gross zero. This is used in several ways in different applications.

Содержание ZK830
























































Результаты поиска

Содержание ZK830

Отзывы:

Похожие инструкции для ZK830

Бренды по названию

Популярные бренды

Avery Weigh-Tronix ZK830, Инструкция пользователя

Результаты поиска

Содержание ZK830

Отзывы:

Похожие инструкции для ZK830

Бренды по названию

Популярные бренды