Avery Weigh-Tronix WI-125 SST, Руководство по обслуживанию

Страница: 14 / 52

14
WI-125 SST Indicator Service Manual
Layout (Printing)
STATUS CODES
These are the most common
characters you will see on a
terminal:
“0” = Valid weight
“1” = Motion
“2” = Range error
(Over/Underlaod)
“4” = A-D error
“8” = Low voltage
Combinations of these errors
can also occur. (e.g., “3” =
Range error (2)
plus Motion (1))
Setup, Scale, Options, Security, Serial, Print, Busy-
Disabled, Enabled
Disables or enables the hardware ready/busy (CTS/DTR) line. If your
printer does not have a ready/busy (CTS/DTR) line, this parameter
must be set to disabled. If your printer has a ready/busy (CTS/DTR)
line, you can enable this parameter so the indicator will know if the
printer is ready or busy (Clear To Send/Data Terminal Ready).
Setup, Scale, Options, Security, Serial, Print, Busy, Baud-
1200, 2400, 4800, 9600, 300, 600
This option lets you choose the baud rate for your printer or periph-
eral device.
Setup, Scale, Options, Security, Serial, Print, Busy, Baud, Parity-
Clear, Even, Odd, Set
This option lets you choose parity as even, odd, clear (logic 0 or
space), or set (logic 1 or mark).
Data Bits Stop Bits Parity
Set (Mark) 7 2 none
Clear (Space) 8 1 none
Mark 7 2 none
Space 8 1 none
Odd 7 1 or 2 odd
Even 7 1 or 2 even
Setup, Scale, Options, Security, Serial, Print, Busy, Baud, Parity, No. Stops-
1, 2
With this option you can set the number of stop bits as 1 or 2.
Setup, Scale, Options, Security, Serial, Print, Busy, Baud, No. Stops-
Layout
Use this print-layout option to customize the physical arrangement
of your printed information. This section assumes you have the
time/date option card and that the parameters are all enabled. The
next several pages deal with the layout of your printed output.
The
rest of the documentation on configuration follows this layout
section.
What you can print depends on which indicator you have; LED or
LCD. What each can print is presented below.
LCD Serial Output:
• Time
• Date
• Gross weight
• Tare weight
• Net weight
• Displayed weight
• Custom wording you choose
• Status (see note at left) is available only if Broadcast or Other is
enabled under Enquire/Device.
• ID