Avery Weigh-Tronix WI-125 SST, Руководство по обслуживанию

Страница: 15 / 52

15
WI-125 SST Indicator Service Manual
STATUS CODES
These are the most common
characters you will see on a
terminal:
“0” = Valid weight
“1” = Motion
“2” = Range error
(Over/Underlaod)
“4” = A-D error
“8” = Low voltage
Combinations of these errors
can also occur. (e.g., “3” =
Range error (2) plus Motion (1))
LED Serial Output:
• Time
• Date
• Weight only, no labels
• Gross weight
• Tare weight
• Net weight
• Displayed weight
• Orion1 label (Eltron Orion/Zebra LP2844)
• Orion2 label (Eltron Orion/Zebra LP2844)
• Orion3 label (Eltron Orion/Zebra LP2844)
• Barcode label (Eltron Orion/Zebra LP2844)
• Custom wording you choose
• Number of Accumulations
• Total accumulated weight
• Status (see note at left) is available only if Broadcast or Other is
enabled under Enquire/Device.
• Steady
• ID
These are the commands in the LED model you use to print the
listed items:
Print Command Item
HOUR Time
DAY Date
BARE Weight digits without G, T, N, or lb/kg.
GROSS Gross weight
TARE Tare weight
NET Net weight
DISPLAY Displayed weight
ORION1 Orion 1 Layout (see Sample 1)
ORION2 Orion 2 Layout (see Sample 2)
ORION3 Orion 3 Layout (see Sample 3)
BARCODE Barcode Layout (see Sample 4)
ASCII Custom digits (ASCII string)
COUNT Number of accumulations performed
TOTAL Total accummulated weight
STATUS Current scale status (stable, motion, etc.)
STEADY If stable=prints<sp>. If motion=prints 'M'
ID Prints ID if ID is enabled
DELETE Deletes a layout item
These are the commands in the LCD model you use to print the
listed items:
Print Command Item
HOUR Time
DAY Date
GROSS Gross weight
TARE Tare weight
NET Net weight
DISPLAY Displayed weight
ASCII Custom digits (ASCII string)
STATUS Current scale status (stable, motion, etc.)
ID Prints ID if ID is enabled
DELETE Deletes a layout item
The commands below are for
the WI-125 LED only!
Serial Input Commands
Z
Zero
K Go to Kg
P Go to lbs
L toggle lbs/kg
T Tare, PB
N Go to net mode
G Go to gross mode
Enq Print