Avery Weigh-Tronix WI-125 SST, Руководство по обслуживанию

Страница: 13 / 52

13
WI-125 SST Indicator Service Manual
Setup, Scale, Options, Security, Code No.-
Control, Tare, ID, Cutoffs, Hour, Acc, Count, Day, Light
Under each item you have the option of choosing OFF to leave the
option unlocked or choosing ON to lock the option behind the
security code. If ON is chosen you can view but not change that
parameter value in the operations menu (unless the security code is
entered). (Control, Cutoffs, Acc, Count are only on the LED model)
(Light is only on the LCD model.)
Setup, Scale, Options, Security, Serial, Print-
Button
Choosing OFF disables the front panel PRINT button. Choosing ON
enables the front panel PRINT button.
Setup, Scale, Options, Security, Serial, Print, Button-
Enquire
This sub-menu allows you to choose a printer or other device which
will send an enquire code to the indicator. You may select the ASCII
code number you wish to recognize as the enquire code number.
ASCII decimal 05 is the default value. If a device sends the enquire
code number to the indicator, the indicator will recognize the value,
then transmit weight data. If a computer sends the enquire code
number, the Button, Auto and Broad. selections are overridden and
will not function.
Setup, Scale, Options, Security, Serial, Print, Button, Enquire-
Auto
With auto print enabled the indicator automatically transmits weight
data when the scale weight stabilizes at greater than 1% of capacity.
To print again, scale weight must fall below 1% of capacity and
stabilize above 1% of capacity again. OFF disables the auto print
feature. ON enables the auto print.
Setup, Scale, Options, Security, Serial, Print, Button, Enquire, Auto-
Auto-Pct.
Auto-Pct stands for auto percent. This allows you to change the auto
print reset weight at 0.1% rather than the default of 1%.
Setup, Scale, Options, Security, Serial, Print, Button, Enquire, Auto-
Broad.
Broad. stands for broadcast. If you enable (ON) broadcast, weight
data is transmitted at the display rate. Choosing OFF disables the
broadcast. If broadcast is enabled, the Button, Enquire, and Auto
selections are overridden and will not function.