Avery Dennison SNAP 700, Руководство оператора и по обслуживанию

Страница: 30 / 153

30
User’s Manual—SNAP™ 700 Printer
3.2 Sending a Print Job to the Printer
In order to print labels, you must send a print Job to the printer. The print job
tells the printer what label to print, what information to print on the label, and how
many labels to print.
Getting a print job to the printer depends on how your company system is set up.
You may be using AVERY DENNISON’s label design program PCMate Platinum,
or you may be using a special application on a PC or a mainframe. Consult your
supervisor on how your company sends print jobs.
3.3 Printing Labels
3.3.1 The Control Panel
The Control Panel on your SNAP 700 printer is located at the top of the machine.
Figure 11 shows the control buttons and lights displayed on the printer. The
buttons allow you to control the printer, and the lights indicate the status of the
printer.
• The Start/Stop Button is a blue button that starts and stops printing. If there
are labels ready to print, pressing the Start/Stop Button starts printing. If the
printer is running, pressing the Start/Stop Button stops printing.
• The Ready Light is a green light that indicates the printer has been powered
up, completed its diagnostics, and is ready to accept print jobs.
•
The Data Light green light that indicates you have sent a print job to the
printer and it is ready to print. If the Data Light is flashing, you are at end of
day (see section 3.3.4).
•
The Supply Light is a yellow light indicates that: either the stock or ink
supply has run out and needs reloading or the stacker is full. It may also
come on if you have an accessory attached and there is a problem with it.
•
The Error Light is a red light that indicates a problem exists somewhere in
the printer.
•
The Voice Button is a yellow button and will play a message describing the
status of the printer. Use it to determine causes of printer issues. If the
printer is printing, pressing the Voice Button will stop printing.