Avery Dennison ALS 306, Руководство по установке, Страница: 37 / 56

37
2 I
NSTALLATION
2.3 C
ONNECTING THE SENSORS
ALS
306
309
Adjusting the Avery sensor

Press the button [63A] for 2 s, until the status LEDs
[63B] light permanently.
– Notice : Don´t press the button for longer than 5 s,
otherwise you risk to switch between NPN/PNP, see
chapter “Switching the Avery sensor - PNP/NPN”
auf Seite 38.
– After releasing the button, a teaching „time window“
opens for 2-8 s. During this period, the status LEDs
are flashing fast [64].

While the LEDs are flashing, move as many labels
as possible (at least 2) through the sensor fork.
– This has to be done manually , not by pressing the
button.
– If the labels were detected successfully, the status
LEDs are flashing 2x [65].
– If the labels were not detected ideal, the status
LEDs are flashing 4x.

Repeat the procedure, if the labels were not
detected ideal.
[63] Starting the autoteaching.
[64] Autoteaching is indicated by flashing LEDs.
[65] Sensor is successfully set = flashing 2x.
m
in
. 2 s
A
B
2-8 s
mi
n. 2x