Avery Dennison ALS 306, Руководство по установке

Страница: 22 / 56

22
2 I
NSTALLATION
2.2 U
NPACKING
,
ASSEMBLING AND CONNECTING THE MACHINE
ALS
306
309
Holding machines in place with the flange
plate
– Order number for flange plate assembly [27C] (in-
cluding screws and washers): A7622
Tool:
– 8/10 mm hexagon socket driver

Screw the flange plate [27C] to the appropriate
flange at the machine.
– Use the 4 screws provided in delivery.

Lift the machine and slide the clamp over the end of
the tubing of the support. Tighten the clamp screw
[27A].
Tightening torques:
– Fixing screws flange plate [27B] (ISO 4762
M10x25 A2) . . . . . . . . . . . . . . . . . . . . 45 Nm
– Clamp screw flange plate [27A] (ISO 4762
M12x45 A2) . . . . . . . . . . . . . . . . . . . . 70 Nm
Holding the machine in place with flange
plate and adjustable head joint
For this purpose, a fixing tube is available, with which
the adjustable head joint can be used in combination
with a flange plate.
– Article number fixing tube: A9951
Tools:
– 8/10/17 mm hexagon socket driver

Screw the flange plate to the appropriate flange at
the machine (see previous chapter).

Push the fixing tube into the flange at the flange
plate [28]. Tighten clamp screw.

Mounting the head joint to the support stand: See
“Holding machines in place with the adjustable head
joint” on page 20.
[27] Attaching the flange plate (C)
B
A
C
[28] Fixing the labeller with flange plate and adjustable head joint.
A 7 6 22
A 9 77 3
A 999 1
Flange plate assy.
Adjustable head joint element
Lead screw
of support stand
Fixing tube