Avery Berkel A301CE, Инструкция по эксплуатации, Страница: 97 / 168

7 — Appendices
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 7 - 23
Cutting pause
The cutting pause function delays the cutting of
the following slice of product; in this way it is
easier to put the slice on the proper slice
receiving tray.
Before a new cutting cycle the product holder
stops at the end of its travel for the time fixed.
25 tenth of a second is the max. programmable
time.
To set up the function press the ENT button, the
Cutting Pause message will be visualised.
Use the numerical buttons to set up the desired
value; press the
ENT button to confirm the datum
and press the ESC button to exit.
The letter P means that the function has already
been set up.
Auto power OFF
Auto power off : if the machine is not used for a
longer time than the fixed one, it stops
automatically.
99 minutes is the max programmable time.
To set up the function press the ENT button, the
Auto Power Off message will be visualised.
Use the numerical buttons to set up the desired
value; press the
ENT button to confirm the datum
and press the ESC button to exit.
Rotation blade OFF
Rotating blade off: if the holder product is not
used for a time which is longer than the fixed one,
the machine stops automatically.
99 seconds is the max programmable time.
To set up the function press the ENT button and
the Blade Rotat. Off message will be visualised;
use the numerical buttons to set up the desired
value, press the button to confirm the datum and
press the
ESC button to exit.