Avere FXT 5000 Series, Руководство по установке

Страница: 14 / 47

FXT 5000 Series Installation Guide
If an item has been moved from an environment that is colder and less humid than the current installation and
operating environment, allow it to reach the same temperature as the current environment before unpacking it, and
before installing it or powering it on.
If you notice condensation on any part of the item, Avere Systems recommends waiting a minimum of 24 hours for it
to acclimate before installation and use.
3.2 Electrical Considerations
This section lists guidelines for safe electrical handling of the FXT 5000 Series node.
3.2.1 Electrical Code Compliance
To avoid the possibility of an electrical shock hazard, the electrical installation of an FXT 5000 Series node and its
associated rack(s) and power distribution units (PDUs) must comply with all applicable local, state, and national
electrical codes and regulations. Contact a qualified electrician if you are unsure about proper electrical installation.
3.2.2 Earth Grounding
• The building site, rack, and PDU electrical receptacles powering the FXT 5000 Series node must be properly
grounded during the lifetime of the installation.
• The earth-ground connection for the rack must be designed and installed specifically for the rack, and must not
rely solely on unintentional grounding connections made through FXT 5000 Series nodes and other equipment
installed into the rack.
• The Avere FXT Edge Filer node has been approved for use only with TN-type earth grounding systems. It has
not been approved for use with IT-type earth grounding systems. Do not connect the node to any non-TN type
of earth grounding system.
• To avoid the possibility of an electrical shock hazard, the FXT 5000 Series node must be properly connected to
earth ground during the lifetime of the installation. The node receives its earth ground connection through the
AC power cords.
To ensure the integrity of the ground connection, observe the following guidelines:
– Use only power cords with a grounding plug.
– Inspect the ground pins of each power cord before initial use.
– Never remove or disable the grounding pin on a power cord or use an adapter that might affect the
integrity of the ground connection.
10 Chapter 3. Precautions for Product Use