Aventura DHN Series, Руководство пользователя

Страница: 127 / 178

DHN Series Network Video Recorder User Manual
126
9.2.13 Virtual Host Settings
Purpose:
You can directly get access to the IP camera management interface after enabling this function.
The Virtual host function can be only configured through the web browser.
Steps:
1. Enter the Advanced settings interface, as shown in the Figure 9. 2323.
Configuration > Remote Configuration > Network Settings > Advanced
Figure 9. 23 Advanced Settings Interface
2. Check the checkbox of the Enable Virtual Host .
3. Click the Save button to save the setting.
4. Enter the IP camera management interface of NVR. The Connect column appears on the right-most side of
the camera list.
Configuration > Remote Configuration > Camera Management > IP Camera
5. Click the link and the page of IP camera management appears.
9.2.14 Telnet Settings
Purpose:
Telnet function provides an easy way to get access to the NVR. You can see the advanced information about the
device by inputting command; as well the configuration can also be realized through telnet connection.
Steps:
1. Enter the Advanced settings interface
Configuration > Remote Configuration > Network Settings > Advanced
2. Check the checkbox of the Enable Telnet .
3. Click the Save button to save the setting.
4. You can open the Command Prompt window in your PC, and input “telnet IP Address
” to connect with the
NVR, as shown in the figure below.
Example:
If the IP address of the NVR is 192.0.0.64, you can input “telnet 192.0.0.64” and then press Enter to connect
to the NVR.