User guide GENIO 10
Page 5
2. Description of the components and their functions
12 11 10
1
2
3
4 5
6 7 8 9
1. Control dial for COMP, GAIN, TREBBLE, MIDDLE and BASS
With the 5 potentiometers per channel the following settings can be made:
COMP:
The compressor reduces the level after exceeding a threshold value.
GAIN
: The GAIN control adjusts the gain of the channel at the level of the signal source at the input.
With the
3-band equalizer
(treble, middle, bass) the microphone is adapted to the speaker to achieve
optimum sound.
TREBLE
:
±12 dB bei 10 kHz
MIDDLE
:
±12 dB bei 700 Hz
BASS
:
±12 dB bei 70 Hz
2. Gate and Clipping display (channels 1
–8):
Visual indication of the activated or over-amplified input.
3. Volume control (channels 1
–8):
With the volume controls the level of the signal sources can be adjusted
which are connected to the microphone/line inputs. During the installation by the technical staff the optimal
level is set and will be indicated by an identification mark.
4. Bass and treble controls for CD/Aux
5. Volume control for CD/Aux
6. USB port
7. Connector for SD card
8. Volume/Value control dial:
Control dial with integrated push button. Serves amongst others to control the
“Master Volume” that is to regulate the volume for all outgoing signals.
9
.
Preset/Parameter control dial:
Control dial with integrated push button. Serves amongst others to retrieve
saved presets.
10. LCD Display:
The bright display helps with a clear, user-friendly operation of the device.
11. Buttons: Rep, Prev Vol, Play Pause, Next Vol
12. Channel switch CD/Aux:
Media selection. The playback devices are connected to the back.
