User guide GENIO 10
Page 10
THE
FOLLOWING
MODIFICATIONS
ARE
TO
BE
PERFORMED
BY
QUALIFIED
AUDIO
TECHNICIANS
ONLY
4.2 The parameter menu
The functions and settings in the parameter domain should be changed by qualified personnel only. The only
exception is the programming of a new preset as descried in section 4.1. The digital control boasts the great
advantage of the programmability of various functions. In this parameter menu, not only the presets are
programmed, but among others, the equalizers and the parameters for feedback elimination are set. In fact,
the entire programming of the Genio 10 is done here with menu-driven user guidance by using the display and
merely the “volume” and “preset”-dials. No PC or Laptop is required. In order to enter the parameter menu first
turn the unit off. Then turn it back on again while pushing the “volume” dial until the parameter menu with its
four items “preset, parameters, config and service” appear. By turning the preset dial, you can change from
one menu item to the next which is indicated by a small triangle. By pushing the preset dial, you choose the
mode “edit Parameterset 1” (see below).
By turning the volume dial you can choose which parameter set you would like to change. You have four
possibilities (1-4). Pr
ess the “preset”-dial again and select the equivalent menu.
The following applies:
Turning preset dial one click to he right will always bring you to the next item of a menu i.e. to the next
parameter to be programmed. This dial is therefore marked “parameter”. For simplicity we will continue to
name this dial preset dial. Changing a value or character is always done by turning the volume dial. This dial
is therefore also marked “value”. However, here too for simplicity, we will stay with the name of volume dial.
This dial is a so-called dynamic rotary dial, meaning that when slowly turning it, the value will change in small
increments whereas turning a dial by the same amount more quickly will change the value proportionally
faster. This enables a fast but precise setting of the desired values.
By pushing the value dial, you will go up one level in the menu structure. Whenwever xou have changed any
parameter, you will be asked whether you would like to “Save changes?” Pushing the volume dial indicates
“yes” and your changes will be saved (“Saving… don not interrupt”. Pushing the preset dial indicates “no” and
the display will show “Changes discarded”
The following four sections will describe the programming possibilities of the four menu items.
4.2.1 Preset
Select the desired number from the edit-preset-menu.
Preset name
: Determine the name for a given preset. The procedure is described in detail in section 4.1
Preset master volume
: Setting the master volume for a given preset.
Preset output
: Choose the desired outputs for a given preset. The procedure is described in detail
in section 4.1.
