User guide GENIO 10
Page 3
1. Introduction
Thank you for choosing the automatic mix-amplifier Genio 10 form AVE. Genio 10 is a device which
is used impressively in medium and large rooms where the acoustic conditions complicate
intelligibility.
Genio 10 is equipped with 10 inputs: 8 balanced mic/line inputs, 2 switchable CD/Aux inputs with
volume, treble and bass controls. Each mic/line input is equipped with a COMP controler, a GAIN
control, a 3-band EQ, a volume, operating and peak display and a rocker switch for adjusting Line,
Micro Low , Micro High and the connecting of phantom power (48 V). This makes it possible to
seamlessly connect any type of microphone and produce a uniform sound pattern for each
speaker.
The device also has a USB port and a SD card slot. The unit also offers a variety of additional
features such as a directly controllable output 0 - +6 dB, optional remote control, a switchable
sensitivity for CD, a switchable adjustable sensitivity for Aux, Output 1 and Output 2 for controlling
an external power amp. The speaker outputs are designed for 100/70/50 V and also for 4 ohm.
Each output has a 31-band graphic equalizer, a 6 parametric delay and a limiter assigned.
All sources are controlled by a 2-channel digital signal processor. The Genio 10 is equipped with its
own software. All settings are made through a menu-driven user interface directly on the device.
This makes programming easy and convenient
– a laptop or PC is not needed. The user can
instantly recall 20 different presets which can be set for different occasions. A protection circuit
protects all settings from access by unauthorized persons.
Genio 10 is equipped with the latest technology (SMD, digital power amplifier, switching power
supply).
All components are integrated in a 19“ cabinet 2 U.
Genio 10 is available in for versions: 2x240 W, 1x240W, 2x150 W, 1x150 W.
Sections 2., 3. and 4.1 in the manual are intended for the user where the components oft he device
are explained and the operation is described. The subsequent part is aimed at qualified
professionals who are conducting the settings and programming.
