Keystroke the user code:
Programming of NUMBERS
This function allows programming, display and modification of telephone numbers.
To enter the telephone numbers press keys
related to the 8 telephone numbers the
messages are sent to (1 to 4 for message 1; 5 to 8 for message 2).
- 22 -
G
4) Stand-by/Mains failure.
When the power supply is connected, the LCD displays
AVE SPA
for
10 seconds. Then the dialler remains in stand-by awaiting the code to receive the program-
ming, which will personalise it, according to the user requirements. The
AVE SPA
mention is
displayed as soon as the dialler is in stand-by. The mains failure is indicated by the
AVE SPA
flashing mention.
Microphone and loud speaker
The microphone and loud-speaker speakerphone, which are seated under the central slotted area,
allows to record the alarm message and to listen to it more than once.
PROGRAMMING
To enter the programming for the first time, use the FACTORY CODE. Then use the pre-set
USER
CODE
. After entering the User code, you can enter the
NUMBER
programming or the
FUNCTION
programming by pressing the suitable key. The programming exit is made automatically after 60
s. after pressing the latest key (TIME-OUT exit). When inserting the inner card Jumper
J1
in the left
position, the programming is fully enabled. In the right position, it will disable functions 4 and 5.
AVE SPA
AVE SPA
Stand-by: fixed signal
Mains failure: flashing signal
0000
0000
1st time Factory code (0000)
afterwards user code = programmed
NUMERI
NUMERI
FUNZIONI
FUNZIONI
AVE SPA
AVE SPA
Programming exit and stand-by
condition achievement.
✆
✆
F
F
✗
✗
1
8
÷
C.410 7-06-2002 16:42 Pagina 22
