- 19 -
G
INTRODUCTION
The AF998CE portable telephone dialler connected to a burglar control panel, in case of emer-
gency, allows to send previously recorded telephone messages to one or more users of the telepho-
ne line, through the GSM network. For proper operation, it requires one of the following models of
a GSM ERICSSON portable telephone: GA628, GH688, GF788, DUAL BAND S868.
The portable phone is not included.
TECHNICAL FEATURES
• Nominal power supply: 12 Vdc (SELV)
• Range 12 ÷ 15 Vdc
• Current demand: 200 mA max. during battery recharge
• Operation time in case of mains failure: 30 days approx. at rest, ensured by a back-up battery.
The battery is not included.
• Battery technical data: Rated voltage 6, 1.2 Ah, rechargeable, lead-acid type, hermetic
• Battery current demand: 1 mA at rest
• User code from 4 to 7 figures
• 2 independent transmitting channels with related message that can be personalised (message
duration 10 s.)
• Possibility of dialling up to 4 telephone numbers (16 figures max.) for each channel.
• Input block to exclude the calling cycle on channel 2.
• Low battery warning output
• Built-in tampering device
• Network search time programming (15 or 30 seconds)
• Built-in keypad, speak, microphone and display
• Wall-mounting
• Dimensions: 310x214x91 mm.
IMPORTANT: For installation the GSM network must be present.
Reference standards
• The telephone dialler complies to the following standards: CEI 103-5, CEI 103-7, CEI 79-2,
UNI-CEI ETS 300 001, NET 4, Technical Rule 747
OPERATION DESCRIPTION
The telephone dialler is provided with two transmitting channels.
The user can record, for each channel, a message lasting 10 seconds that will be sent, in case of
emergency, to 4 programmable telephone numbers (totally 8).
In case of alarm, the dialler switches on the portable telephone and, once the network search
pre-set time has elapsed, the following cycle starts:
–
It calls the first stored number.
If the person called answers (on-line signal) the dialler reproduces
the stored message four times (4 x 10 s.) (the message can be reproduced 8 times by pressing,
under the telephone number programming (described at pages 23/23), the key
✴
before the
C.410 7-06-2002 16:42 Pagina 19
