- 20 -
G
number to program. In this case the called person answer will not be controlled. After emitting a
sound signal, it awaits the BLOCK signal that stops the calling cycle, which can be sent by the
called person by pressing key # on the telephone keypad of the person receiving the alarm call.
–
If the dialler does not receive the block signal,
it calls the second stored number and so on up
to the fourth number.
Before calling the next number, the dialler awaits that 8 rings are emitted (40 s.). The calls are
repeated three times for each number, excluding the numbers that have answered. The calling
cycle stops with the BLOCK signal (# code) or, when the four numbers related to the message
have been called three times. The alarm cycle can be stopped also locally, by dialling the USER
code directly on the dialler keypad followed by key "X", or by pressing the pushbutton connected
to IN/BL (only for channel 2) (refer to wiring diagram).
Channel 1 has priority on Channel 2.
If the inputs are in alarm condition at the same time, the
dialler dials first the channel 1 calls and then the channel 2 calls in priority sequence, according
to the above described mode.
The above mentioned telephone dialler operation is enabled in case of mains failure only if
the 6V/1.2Ah inside battery (not included; code AF910) is connected to supply the electronic
card in this situation, while the portable telephone is supplied by its own provided battery.
IMPORTANT:
• All the operations related to the portable telephone (contract, subscription fee, aftersales
service, maintenance) are at user’s charge.
• Before installing the telephone dialler, it is necessary to charge completely the battery of the
inside portable telephone.
AVE is not liable for any problem or failure related to the portable telephone which is not sup-
plied but used in combination with the AF998CE product.
FRONT PANEL
DESCRIPTION
Side view
Front view
Closing screw (under the plastic plug)
Anti-removal
tampering
push-button
C.410 7-06-2002 16:42 Pagina 20
