Avaya X330W-2DS1, Руководство пользователя, Страница: 96 / 176

Chapter 7 X330WAN CLI Commands
74 Avaya X330W-2DS1 User’s Guide
ip ospf cost (Interface context)
Use the
ip ospf cost
command to configure interface metric. The
no
form of
this command sets the cost to its default. The default is 1 .
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip ospf cost <cost>
Example:
ip ospf cost 10
ip ospf dead-interval (Interface context)
Use the
ip ospf dead-interval
command to configure the interval before
declaring the neighbor as dead. The
no
form of this command sets the dead-
interval to its default. The default is
40
.
Note: This command is executed from the Serial, Loopback, Fast Ethernet and
Fabric Fast Ethernet interfaces.
The syntax for this command is:
[no] ip ospf dead-interval <seconds>
Example:
ip ospf dead-interval 15
ip ospf hello-interval (Interface Mode)
Use the
ip ospf hello-interval
command to specify the time interval
between hello's the router sends. The
no
form of this command sets the hello-
interval to its default. The default is
10
.
cost An integer in the range 1 to 65535.
seconds An integer in the range 1 to 65535.