Avaya X330W-2DS1 Скачать руководство пользователя страница 106

Страница: 106 / 176

Chapter 7

X330WAN CLI Commands

Avaya X330W-2DS1 User’s Guide

The syntax for this command is:

[no] ip vrrp

<vr-id>

auth-key

<key-string>

ip vrrp 1 primary 192.168.66.23

(ip vrrp) override addr owner

Use the

ip vrrp override addr owner

command to accept packets

addressed to the IP address(es) associated with the virtual router, such as ICMP,
SNMP, and TELNET (if it is not the IP address owner). Use the

form of this

command to discard these packets.

Note:

This command is executed from the Fast Ethernet and Fabric Fast Ethernet

interfaces.

The syntax for this command is:

[no] ip vrrp

<vr-id>

override addr owner

Example:

X330WAN-2DS1-1(configure)# ip vrrp 1 override addr owner

(ip vrrp) preempt

Use the

ip vrrp preempt

command to configure the router to preempt a lower

priority master for the virtual router ID. Use the

form of this command to disable

preemption for the virtual router instance. By default, preemption is enabled.

Note:

This command is executed from the Fast Ethernet and Fabric Fast Ethernet

interfaces.

vr-id

Virtual Router ID (1-255)

key-string

Simple password string

vr-id

Virtual Router ID (1-255)

Содержание X330W-2DS1

















































































































































































Результаты поиска

Содержание X330W-2DS1

Отзывы:

Avaya X330W-2DS1, Руководство пользователя, Страница: 106 / 176

Результаты поиска

Содержание X330W-2DS1

Отзывы: