manualshive.com logo in svg

Avaya X330W-2DS1, Руководство пользователя, Страница: 32 / 176

Поделиться
Скачать
Avaya X330W-2DS1 Скачать руководство пользователя страница 32

Chapter 1

Overview

10

Avaya X330W-2DS1 User’s Guide

Figure 1.3 provides a graphic representation of the Fast Ethernet interfaces.

Figure 1.3

Fast Ethernet Interfaces

Note:  

One or more IP interfaces can be defined over each virtual, Fast Ethernet, or 

Fabric Fast Ethernet interfaces.

Data Flow

The X330WAN has the following major traffic paths:
•

WAN to LAN (external) – The X330WAN can route WAN traffic through a 
firewall and/or a Virtual Private Network.

•

WAN to LAN (internal) – The X330WAN can route WAN traffic directly 
to/from the LAN.

Front Panels and LEDs

This section illustrates the front panels of the various available X330WAN access 
router modules and describes their LED functions.
An X330WAN front panel contains LEDs, WAN and Ethernet connectors, and a 
console connector. The status LEDs provide at-a-glance information.
The front panel LEDs consist of Port LEDs which display information for each port. 

Fast Ethernet

Interface

IP Interface 1
IP Interface 2
IP Interface 3

IP Interface 4
IP Interface 5
IP Interface 6

Channel Group 1

Virtual Layer 2

Interface

Содержание X330W-2DS1

















































































































































































Отзывы:

Нет отзывов