manualshive.com logo in svg

Avaya X330W-2DS1, Руководство пользователя, Страница: 22 / 176

Поделиться
Скачать
Avaya X330W-2DS1 Скачать руководство пользователя страница 22

Preface

VIII

Avaya X330W-2DS1 User’s Guide

NEBS Compliance Standards

The following table shows the X330WAN compliance with NEBS standards.

How to Contact Us

If you need additional help, the following services are available. You may need to 
purchase an extended service agreement to use some of these services. Contact your 
Avaya representative for more information.
To contact Avaya’s technical support, please call:
•

From the United States: 1-800-237-0016, press 0, then press 73300

•

From South America and Central & Latin America (CALA): 1-727-217-2425 for 
Spanish

•

Outside North America: +972-3-645-8458

For updated information, visit 

http://www.avaya.com/support

.

All trademarks, registered trademarks, service names, product and/or brand names are the sole property of 
their respective owners.
Copyright © 2002 Avaya Inc. All rights reserved.

Certification

Description

NEBS level 3

USA Electrical and Physical.

Содержание X330W-2DS1

















































































































































































Отзывы:

Нет отзывов