manualshive.com logo in svg

Avaya X330W-2DS1, Руководство пользователя, Страница: 102 / 176

Поделиться
Скачать
Avaya X330W-2DS1 Скачать руководство пользователя страница 102

Chapter 7

X330WAN CLI Commands

80

Avaya X330W-2DS1 User’s Guide

Example:
To set the RIP Send and Receive mode on the interface “marketing” to be listen-only:

X330WAN-2DS1-1(super-if:Serial:1:1)# ip rip send-receive talk-

listen

ip rip split-horizon (Interface Context)

Use the

 ip rip split-horizon 

command to enable split-horizon mechanism. 

The

 no 

form of this command disables the split-horizon. By default split-horizon is 

enabled.
The split-horizon technique prevents information about routes from exiting the 
router interface through which the information was received. This prevents routing 
loops.

Note:  

This command is executed from the Serial, Loopback, Fast Ethernet and 

Fabric Fast Ethernet interfaces.

The syntax for this command is:

[no] ip rip split-horizon

Example:

X330WAN-2DS1-1(super-if:Serial:1:1)#

 no ip rip split-horizon

listen-only - 

Set RIP to only receive updates on 

the interface and not transmit them (for Avaya 
P332G-ML/P332GT-ML devices only).

default route metric

Integer value 

Содержание X330W-2DS1

















































































































































































Отзывы:

Нет отзывов